65Products found
View
  • -12%

    MRO 6004 TRANSFORMER MAINT KIT

    Sold By: Karvi E&C

    TRANSFORMER MAINTENANCE KIT
    Emergency Leak Repair Kit for Transformer Oil
    CONTENT

    MRO 8011 ? E Putty ? 1 Kg

    MRO 8000 ? Ti PUTTY ? 1 Kg

    MRO 8051 ? S Stick ? 6 Nos

    MRO 1017 ? Paint Remover ? 500 ml x 2 cans

    MRO 1011 ? Kleaner-Degreezer ? 500 ml x 2 cans

    MRO 1020 ? Brite Galva ? 500 ml x 2 cans

    MRO 9020 ? Reinforcement Tape ? 2 Rolls

    MRO 6009 ? CW Kit ? 1 Set

    Nitrile Gloves ? 4 Pairs

    Description
    MRO 8011 ? E Putty

    A fast curing, steel-filled epoxy putty for dependable emergency repairs and quick maintenance work.

    MRO 8000 ? Ti PUTTY

    High performance alloy reinforced epoxy putty, engineered to make precision repairs to critical stress bearing equipment.

    MRO 8051 ? S Stick

    A versatile, hand-kneadable 2-in-1 easy to use epoxy

    putty stick.

    MRO 1017 ? Paint Remover

    A fast acting blend of solvents for removal of paints, gaskets, adhesives, sealants, lacquers and varnishes without excessive scraping or causing damage to the surfaces.

    MRO 1011 ? Kleaner-Degreezer

    A non chlorinated, fast drying cleaner / degreaser for cleaning oil & grease.

    MRO 1020 ? Brite Galva

    A high performance zinc coating designed to provide true galvanic corrosion protection to Transformer Fins and stop rusting and rust creepage.

    CURE

    MRO 8011 ? E Putty

    A 12.7mm thick section will harden at 21?C in 1 hour.

    MRO 8000 ? Ti PUTTY

    It hardens in around 2 hours at 21?C at 12.5mm thick. The functional cure time may be reduced by curing at an elevated temperature.

    40,308.0045,550.00
    ex. GST
    Sold By: Karvi E&C

    MRO 6004 TRANSFORMER MAINT KIT

    40,308.0045,550.00
    ex. GST
  • -12%

    MRO 9012 DIELECTRIC KOTE (52 KV) – 25 kg

    Sold By: Karvi E&C

    Electrical Insulation Coating
    ?MRO 9012 ? Dielectric Kote? is designed for use in wide range of industrial environments where the high breakdown voltage protection & insulation is required. It provides both insulation as well as combat corrosion and chemically resistant floor surface which is hygienic and easy to clean.
    Applications
    Workshops

    Garages

    Traffic aisles in factories or warehouses

    Production Floors

    Processing areas

    Kitchens

    Laboratories

    Battery Rooms

    Store Rooms

    Sub Stations

    Switchgear panels support structure guards against animal caused flashovers

    Busbars

    Transmission Towers

    Electrical Poles

    Benefits
    4 Packs, Pre measured ratio for ease of on-site mixing and use
    Excellent adhesion to substrate
    Good chemical and mechanical resistance
    De-contaminable ? Bacteria can be removed as coating is impervious
    High Glossy aesthetic finish- brightens up dull factories and warehouses
    Seamless / Joint free applications ? Eliminates potential sources of failure
    Hygienic and does not support growth of bacteria and fungus
    Color Range: Available in different colour combinations as per standard RAL Shade Card.

    24,263.0027,421.00
    ex. GST
    Sold By: Karvi E&C

    MRO 9012 DIELECTRIC KOTE (52 KV) – 25 kg

    24,263.0027,421.00
    ex. GST
  • -12%

    MRO 8071 E PUTTY – 1 Case (6 Units – 500 gm each)

    Sold By: Karvi E&C

    ast curing Steel-Filled Epoxy Putty
    Fast curing steel-filled epoxy putty for dependable emergency repairs & quick maintenance work.
    Applications
    Repairs cracks and breaks in equipment, machinery or castings

    Patches and rebuilds blow holes or pits in castings

    Rebuilds worn equipment, pump and valve bodies

    Restores bearing journals and races

    Low pressure leakages in pipelines/tanks carrying oil/compressed air/gas/chemicals

    Oil leakages in transformers, capacitors & reactors

    Leakage from gear box covers, sumps

    Leakage from welded joints

    Benefits
    High Temperature resistance
    Excellent chemical resistance
    High Compression strength
    Non-rusting, machinable to a metallic finish

    42,474.0048,000.00
    ex. GST
    Sold By: Karvi E&C

    MRO 8071 E PUTTY – 1 Case (6 Units – 500 gm each)

    42,474.0048,000.00
    ex. GST
  • -12%

    MRO 8051 S STICK – 1 Case (12 Units – 114 gm each)

    Sold By: Karvi E&C

    High Performance Steel Reinforced Co-Centric Epoxy Stick
    ?MRO 8051 S Stick? is a fast-setting, industrial-strength polymer compound that enables permanent repairs to anything made of steel or other metals. It also bonds to wood, glass, masonry, and many plastics. Each handy stick contains pre-measured portions of activator and base throughout ? no measuring or mixing tools are necessary. As the epoxy is mixed, the two contrasting colors blend into one color to indicate complete mixing. The consistency (like modeling clay) eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins. ?MRO 8051 S Stick? cures to a dark gray metallic color. Once cured, it can be tapped, drilled, screwed, sawed, machined, ground, filed or painted. It is non-rusting.
    Applications
    For best results, product should be kept and applied at room temperature. ?MRO 8051 ? S Stick? can be applied when temperatures are between 13?C and 52?C. Spread the Stick over prepared surface with hand. Press firmly to ensure maximum surface contact and avoid trapping air. Force the material into any cracks or holes to be filled.

    Benefits
    ?MRO 8051 ? S Stick? is lightweight & simple to use, allowing easy transportation to emergency situations and areas with limited access
    Easy to mix & fast cure for high speed emergency repairs with minimal disruption in in situ applications.
    Excellent adhesion to metals including stainless steel, carbon steel, lead, aluminum, brass and copper as well as many other materials
    Reduced health and safety risks as it is cold-applied and solvent-free allowing application even in confined spaces
    Two-color formulation ensure uniform mix

    7,068.008,040.00
    ex. GST
    Sold By: Karvi E&C

    MRO 8051 S STICK – 1 Case (12 Units – 114 gm each)

    7,068.008,040.00
    ex. GST
  • -12%

    MRO 8024 PIPE WRAP (100 MM X 9 M) – 1 Case (6 Units)

    Sold By: Karvi E&C

    Pipe Repair Tape
    ?MRO 8024 – PIPE WRAP? is a moisture curing urethane impregnated fiberglass repair composite bandage packed in a hermetically sealed foil pouch. It is a fast, permanent and instant emergency repair and strengthening system that seals leak even under pressure. ?MRO 8024 – PIPE WRAP? not only restores a pipe to its original pressure rating, but actually can make the repair area stronger than the original pipe, reducing downtime, saving in parts and labor. It is excellent on steel, SS, copper, PVC, FRP, HDPE, PP, CPVC, UPVC, clay, concrete, rubber, and more.
    Applications
    Impact protection

    Emergency repair

    Corroded pipes

    Irregular pipe fittings

    Force mains and gravity lines

    Joint and tee repair

    Underwater repair and splash zone

    Benefits
    Bonds to most of the substrates
    Ready to use & versatile
    Effective & time-saving
    No mixing and no mess
    Sets rock hard in minutes
    Permanent repair
    Corrosion resistant

    31,152.0035,220.00
    ex. GST
    Sold By: Karvi E&C

    MRO 8024 PIPE WRAP (100 MM X 9 M) – 1 Case (6 Units)

    31,152.0035,220.00
    ex. GST
  • -12%

    MRO 8012 UW PUTTY – 1 Case (6 Units – 1 kg each)

    Sold By: Karvi E&C

    Under water repair putty for damp environments
    ?MRO 8012 ? UW Putty? is a unique, non-rusting, high exothermic epoxy for repairing, patching and rebuilding equipment in chronically wet environments – even under water.
    Applications
    Repairing pipes, fittings, valves, pumps, tanks and other equipment in marine environments, offshore drilling, water treatment plants and paper and pulp mills.

    Repairing concrete pipes and vessels in wet environments

    Potable water leakages

    Benefits
    The putty is unaffected by chlorinated or salt water and is ideal for plumbing, irrigation and marine where applications are underwater
    Prevent environmental damage caused by leakages
    Reduces downtime loss caused due to leakages
    Requires no heat
    Efficient alternate method of repair where welding or brazing would be undesirable or impossible
    Can Repair Intricate shape or forms/thin sections, difficult to weld metals
    No VOC?s and No Shrinkage

    40,632.0045,930.00
    ex. GST
    Sold By: Karvi E&C

    MRO 8012 UW PUTTY – 1 Case (6 Units – 1 kg each)

    40,632.0045,930.00
    ex. GST
  • -12%

    MRO 8011 E PUTTY – 1 Case (6 Units – 1 kg each)

    Sold By: Karvi E&C

    Fast curing Steel-Filled Epoxy Putty
    Fast curing steel-filled epoxy putty for dependable emergency repairs & quick maintenance work.
    Applications
    Repairs cracks and breaks in equipment, machinery or castings

    Patches and rebuilds blow holes or pits in castings

    Rebuilds worn equipment, pump and valve bodies

    Restores bearing journals and races

    Low pressure leakages in pipelines/tanks carrying oil/compressed air/gas/chemicals

    Oil leakages in transformers, capacitors & reactors

    Leakage from gear box covers, sumps

    Leakage from welded joints

    Benefits
    High Temperature resistance
    Excellent chemical resistance
    High Compression strength
    Non-rusting, machinable to a metallic finish

    69,654.0078,720.00
    ex. GST
    Sold By: Karvi E&C

    MRO 8011 E PUTTY – 1 Case (6 Units – 1 kg each)

    69,654.0078,720.00
    ex. GST
  • -12%

    MRO 8001 S PUTTY – 1 Case (6 Units – 1 kg each)

    Sold By: Karvi E&C

    Fast curing Steel-Filled Epoxy Putty
    High performance alloy reinforced epoxy putty, engineered to make precision repairs to critical stress bearing equipment. Used to protect new or repaired surfaces from cavitations, erosion and corrosion.
    Applications
    Repair of cracks and holes on engine and pump casings, pipes, tanks and other equipment

    Resurface of pitted metal surfaces

    Repair of damaged shafts and hydraulic rams

    In-situ flange repair

    High strength structural adhesive for metal bonding

    Creation of irregular load bearing shims and reforming of bearing housings

    Benefits
    Repair cost at fraction of replacement cost
    No equipment/Power supply needed
    Excellent electrical insulation characteristics
    No VOC?s so it can be applied in confined spaces
    High compressive strength and extreme chemical resistant to most acids, bases, solvents, and alkalis
    Good resistance to abrasion, friction reduction and hence ideal for turn-around time
    The product can be applied to any unlimited thickness onto horizontal or vertical surfaces
    Efficient alternate method of repair where welding or brazing would be undesirable or impossible
    Can Repair Intricate shape or forms/thin sections, difficult to weld metals
    Unlimited cycle of repairs possible
    Less Labor costs ? Avoid assembly/disassembly, Pre Machining/Post Machining
    Superior adhesion ? forms a solid bond to steel, cast iron, Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum
    No shrinkage, expansion or distortion
    Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
    Available Packaging

    46,926.0053,040.00
    ex. GST
    Sold By: Karvi E&C

    MRO 8001 S PUTTY – 1 Case (6 Units – 1 kg each)

    46,926.0053,040.00
    ex. GST
  • -12%

    MRO 8000 Ti PUTTY – 1 Case (6 Units – 1 kg each)

    Sold By: Karvi E&C

    High Performance Alloy Reinforced Epoxy Putty
    ?MRO 8000 ? Ti Putty? is a high performance alloy reinforced epoxy putty, engineered to make precision repairs to critical stress bearing equipment. Used to protect new or repaired surfaces from cavitations, erosion and corrosion.
    Applications
    Protects from Bi-metallic Corrosion

    Repairing worn pumps, scored shafts and hydraulic rams

    Rebuilding wear rings, pump impellers, butterfly and gate valves and tube sheets

    Protecting wear plates

    Preventing cavitations to condenser water boxes

    Refitting keyways

    Restoring bearing housings

    Leveling and chocking critical equipment

    Benefits
    High Temperature resistance
    Excellent chemical resistance
    High Compression strength
    Non-rusting, machinable to a metallic finish

    54,162.0061,230.00
    ex. GST
    Sold By: Karvi E&C

    MRO 8000 Ti PUTTY – 1 Case (6 Units – 1 kg each)

    54,162.0061,230.00
    ex. GST
  • -12%

    MRO 7010 WIRE ROPE GEL – 1 Case (4 Units – 5 kg each)

    Sold By: Karvi E&C

    Lubricant
    ?MRO 7010 ? WIRE ROPE GEL? is a highly adhesive, semi fluid extreme pressure grease for lubrication and corrosion protection of wire ropes and steel cables operating under adverse conditions of load, temperatures or environment. It penetrates rapidly through wire rope strands to leave a completely water resistant heavy duty lubricating film which provides both internal as well as external lubrication & corrosion protection. The solid lubricants prevent wearing and premature damage of internal strands and increase the life of the wire ropes. ?MRO 7010 ? WIRE ROPE GEL? forms a protective and lubricating waterproof film over the surface which does not emulsify even if submerged in water.
    Applications
    On wire ropes and steel cables in all cranes, ships, hoists, elevators especially exposed to marine environment or under adverse operating conditions.

    Benefits
    Protect against heavy loads, galling, and seizing
    Molybdenum disulfide solid lubricant & EP additives withstand high loads and pressures
    Reduces wear and friction
    Resists vibratory shocks
    Does not break down or melt or fling under prolonged use
    Effectively provides lubrication & corrosion protection even to the innermost strands

    28,296.0031,980.00
    ex. GST
    Sold By: Karvi E&C

    MRO 7010 WIRE ROPE GEL – 1 Case (4 Units – 5 kg each)

    28,296.0031,980.00
    ex. GST
  • -12%

    MRO 7009 SILICON COMPOUND – 1 Case (12 Units – 1 kg each)

    Sold By: Karvi E&C

    Lubricant cum Sealant
    It?s a Stiff, non-melting silicone grease like compound for use as lubricant for rubber and plastic O-rings & sealant for gaskets and seals.
    Applications
    Lubricant for O-rings, packings, rubbers, gaskets, miniature bearing seals to provide resistance to water, chemicals, oxidation and provide thermal stability

    Lubrication of pneumatic control valves, fire extinguishers and water softener valves

    Sealant and lubricant for glass joints and stopcocks in normal as well as high vacuum systems

    Lubricant for pressure lubricated plug valves, flow meter bearings, ceramic plug cocks

    Sealant for vacuum and pressure systems

    Sealant between synthetic rubber or plastic parts to prevent them from sticking in vacuum or pressure systems

    Chemical barrier and resistant coating for chemical processing equipment

    Damping media for dash pots in electrical and electronic equipment

    Assembly agent for holding rubbers and other parts due to its highly tacky nature

    All ingredients comply with regulations for food grade materials

    Benefits
    Wide service temperature range from -40?C to + 200?C
    Very good oxidation resistance
    Completely resistant to water, steam, humidity and corrosives
    Low vapor pressure and low volatility
    Compatible with plastics, rubbers, elastomers, and other gasketing and O-ring seal materials
    Prevents age hardening, stress cracking and maintains resilience of plastics
    Non gumming, non melting and non toxic
    Provides good lubricating and sealing properties for rubbers and plastics
    Chemically inert and resistant to most chemicals, hot and cold water, vegetable and mineral oils, dilute acids and alkalis, glycerin, ethanol, methanol, butane, steam, natural gas, ethylene glycol, most organic and inorganic chemicals and aqueous solutions.

    49,776.0056,280.00
    ex. GST
  • -12%

    MRO 7006 ELECTRIK MOTOR GEL – 1 Case (12 Units – 1 kg each)

    Sold By: Karvi E&C

    Grease
    High performance extreme pressure non melt grease for high temperature lubrication.
    Applications
    For Electrical Motor Bearing & Fan Bearings.

    For lubrication of anti friction and journal bearings under very severe operating conditions of wear, friction, heat, humidity, loads and high stress.

    Non-drip, non-melt bearing grease for high temperature lubrication of over head conveyor bearings in lithography, paint stoving ovens, curing booths, automotive assembly lines, ceramic, rubber, latex processing, pharmaceutical, bakery, vulcanizing, textile and glass plants.

    For lubrication of plain and anti friction bearings of heavy engineering equipment, processing machines, textile machinery, pumps, mining and construction equipment, EOT cranes, material handling equipment.

    Steel Mill & Foundries: Bearings in soot blowers, furnace door hinges, hot running bearings in axle boxes and kiln cars, furnace louver pins and bushings, pusher mechanisms, hot strip mills, bloom and billet mill roller bearings, crop car wheel and hot metal mixer bearings, open hearth furnaces, converters, ladles.

    For lubrication of anti friction and plain bearings of pre-heater fans, electrical motors, induced draft fans, ovens, pumps, mixers, furnaces, paper mill machinery, sugar plants.

    Benefits
    Wide service temperature range of -30?C to +180?C ( for short intervals up to +200? C)
    Very good adhesion to metal surfaces
    Non melting and does not drip off to contaminate other components
    Highly resistant to water and water washout, humidity, steam, ageing and oxidation
    Retains consistency at high temperatures
    Low evaporation rate
    Heavy duty performance increases relubrication intervals and cuts down lubricant consumption
    Reduces wear and friction and provides emergency running in properties
    Good high temperature performance
    High surface pressure withstanding capacity
    Increases service life of equipment
    Prevents premature equipment failure by providing a solid lubricant film in case of lubricant starvation

    26,988.0030,540.00
    ex. GST
  • -12%

    MRO 7004 ROLLER BEARING GEL – 1 Case (12 Units – 1 kg each)

    Sold By: Karvi E&C

    Heavy Duty MoS2 Grease
    ?MRO 7004 ? ROLLER BEARING GEL? is a high-performance grease with MoS2 solid lubricants for metal/metal combinations involving slow to fast movements, particularly with medium to high loads.
    Applications
    Used successfully on roller bearings, plain bearings, sliding guides, roller guides, ball-and-socket joints, splined shafts and threaded spindles.

    For heavy duty and long term lubrication to bearings and equipment of heavy engineering machinery, textile processing machines, compressors, exhaust fans, overhead cranes, mining and construction equipment, chassis of automotive and transportation fleet, sugar and cement plant machinery, rolling mills.

    For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

    Benefits
    Extremely wide service temperature range of -30?C to +130?C (up to +150?C for short intervals)
    Forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
    Prevents metal-to-metal contact, reduces friction and wear & protects against fretting corrosion
    Highly resistant to hot or cold water and water washout
    Extends re-lubrication intervals and cuts down lubricant consumption
    Combination of EP additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication
    Offers good surface protection and corrosion inhibiting properties
    Very good performance under moderate to high loads and medium speeds under reciprocating motions
    Makes sliding smoother and reduces operational noise
    Increases wear life of the equipment & out performs conventional lubricants

    20,532.0023,280.00
    ex. GST
  • -12%

    MRO 5003 KF 604- 1 Case (10 Units – 25 kg each)

    Sold By: Karvi E&C

    Fire Stop Barrier Mortar
    ?MRO 5003 ? KF 604? is a Single Component non ? combustible Asbestos free fire stop barrier designed for 3 (three) hour fire rating. It is used as fire stop barrier for cable penetrations and cable bulkheads & has 20 years life expectancy.
    Applications
    Permanent fire seal for cables, cable trays and non-combustible pipes.

    FOR USE WITH

    Concrete and masonry assemblies.

    Walls and floors rated up to 3 hours.

    EXAMPLES

    Large openings containing multiple steel, conduit and EMT pipes ( Electrical Metallic tubings).

    Large openings with single or multiple cable tray applications.

    Benefits
    Quick-setting
    Can be used in horizontal or vertical applications
    Saves time
    Versatile
    Single Component & simple mixing
    No effect due to vibration, impact and radiation
    Mechanically strong and can bear drop loads
    Maintenance free

    33,040.0037,400.00
    ex. GST
    Sold By: Karvi E&C

    MRO 5003 KF 604- 1 Case (10 Units – 25 kg each)

    33,040.0037,400.00
    ex. GST
  • -12%

    MRO 5001 KF 600- 1 Case (25 kg)

    Sold By: Karvi E&C

    Fire Retardant Coating
    ?MRO 5001 ? KF 600? is a one part non-flammable water based coating similar in appearance to ordinary latex base paint for protecting electric power cables & junction boxes against ignition & propagation of fire.
    Applications
    By using ?MRO 5001 ? KF 600? one can create fire break/ non-fire zones along the cable runs:

    Vertical cable runs should be protected by coating the entire length @ minimum DFT of 2 mm.

    Horizontal cable runs should be coated at a length of 1.5 meter after every interval of 6 meters @ minimum DFT of 1.6 mm.

    Exposed cable channels should be protected on all sides even underneath. Apply a good opaque coat to the entire exposed part of the cable sheath. Spray gaps and spaces generously so that material can run into them. When calculating amount required, surface curvature of cable must be taken into account.

    Benefits
    Current rating of the coated electrical cables is not reduced.
    Dripping or dropping of burning cable fragments is limited in amount and time depending on the kind and intensity of the fire.
    Escape routes and power supply can be used for a longer time.
    Flames spread on cables and insulatng damage are delayed in the case of prolonged exposure to fire.
    Significant extension of operative condition of cables.

    29,500.0033,335.00
    ex. GST
    Sold By: Karvi E&C

    MRO 5001 KF 600- 1 Case (25 kg)

    29,500.0033,335.00
    ex. GST
  • -12%

    MRO 3003 BRUSHABLE CERAMIC – 1 Case (6 Units – 1 kg each)

    Sold By: Karvi E&C

    Coating
    ?MRO 3003 ? BRUSHABLE CERAMIC? is a high performance, high density ceramic filled brushable epoxy to seal and protect new or repaired surfaces from cavitation, pitting, erosion and wear.
    Applications
    Seal & Protect new equipment exposed to erosion & corrosion

    Rebuild heat exchangers, tube sheets and other circulating water equipments

    Lining tanks and chutes

    Resurfacing and repairing rudders and pintel housings

    Protects pump casings, impeller blades, gate valves, water boxes and fan blades

    Butterfly valves

    Pipes

    Benefits
    Superior adhesion-forms a solid bond
    Improves the efficiency of fluid handling systems
    Excellent alkalis, acids and chemical resistance
    Good Electrical Insulation characteristics
    Ultra smooth brushable consistency self-leveling liquid so it can be applied easily with short-bristle brush or roller

    17,694.0020,040.00
    ex. GST
  • -12%

    MRO 3001 2K PU KOTE – 1 Case (4 Units – 4 kg each)

    Sold By: Karvi E&C

    UV & Chemical Resistance Coating
    ?MRO 3001 ? 2K PU KOTE? is a two component solvent free, PU protective coating with excellent mechanical properties and good abrasion resistance.
    Applications
    Steel / concrete structure

    Concrete tunnel

    Inner pipe line for water and waste water

    Mounted bullets

    Hydro electric penstocks and dam gates

    Cooling tower basins

    Steel, galvanized, aluminium and properly prepared concrete floors

    Piping, metal buildings, conveyors, pumps, storage tank exteriors, wind turbine towers, motors & machinery

    Benefits
    Good
    High mechanical
    High
    High abrasion resistance.
    VOC
    Suitable for potable water pipe
    Excellent UV
    Low maintenance
    Excellent resistance to most industrial chemicals, acids, solvents
    Hygienic seamless surface, easy for cleaning.
    Excellent adhesion ,bonds well with both steel and concrete substrates.

    30,304.0034,248.00
    ex. GST
    Sold By: Karvi E&C

    MRO 3001 2K PU KOTE – 1 Case (4 Units – 4 kg each)

    30,304.0034,248.00
    ex. GST
  • -12%

    MRO 3000 CHEMPRO – 1 Case (4 Units – 5 kg each)

    Sold By: Karvi E&C

    Novolac Resin Based Chemical Resistant coating
    ?MRO 3000 ? CHEMPRO? is a two pack, ultimate chemical resisitant and corrosion protecting high-build solvent free novolac epoxy coating for steel and concrete. Novolac functionality and high cross linking density in ?MRO 3000-Chempro? makes it a barrier coating or lining suitable in applications where acids, alkalis, organic solvents, or a number of chemicals are used in the process.
    Applications
    Acid fume proof roofing

    Boiling water tanks

    Buried tanks and vessels

    Desalination plants

    Offshore risers, piles

    Pipe lines, fittings, valves

    Solvent extraction systems

    Water treatment plants

    Waste water pipes and other steel structures in need of a high performance protection

    Benefits
    High temperature and chemical resistant high build coating
    No VOC . 100 % solids superior Novolac polymer system
    Excellent cathodic disbondment characteristics
    Excellent wastewater and sulphuric acid resistance
    Suitable for pipeline operating temperatures to 120?C
    Resistant to thermal shocks and freeze-thaw cycles
    Abrasion and corrosion resistant
    Resistant to sea water
    Can be applied directly on prepared substrate without using a primer
    Smooth, glossy, easy to clean surface
    Easy to apply solvent free formulation makes it suitable for use in confined spaces

    50,300.0056,840.00
    ex. GST
    Sold By: Karvi E&C

    MRO 3000 CHEMPRO – 1 Case (4 Units – 5 kg each)

    50,300.0056,840.00
    ex. GST
  • -12%

    MRO 2000 BIO-DEGRADABLE KLEANER – 1 Case (4 Units – 5 l each)

    Sold By: Karvi E&C

    Multi-purpose biodegradable cleaner and degreaser
    ?MRO 2000 – BIO-DEGRADABLE KLEANER? is a Industrial strength, all-purpose, concentrated cleaner and degreaser specially-made for pressure spraying, wipe down and immersion cleaning procedures. It aggressively attacks and removes grease, oil, dirt, sludge and other light contaminants and allows to be rinsed off with water.
    Applications
    Suitable for mechanical components washing and degreasing applications to remove ink, oil, mildew, tar, soot, wax, carbon and grease from:

    Bearings

    Carpets

    Castings

    Concrete floors.

    Engines

    Machinery

    Motors

    Tanks

    Valves

    Windows

    Benefits
    Economical, can be diluted with water
    Can be used heated or at room temperature
    Non-toxic and non-flammable cleaning product
    Does not contain ozone-depleting chemicals or compounds (OCDs)

    18,056.0020,440.00
    ex. GST
  • -12%

    MRO 4045 CEMENT SHEET KOTE- 1 Case (20 kg)

    Sold By: Karvi E&C

    Coating
    ?MRO 4045 ? CEMENT SHEET KOTE? is a water-based, high-build, 100% acrylic emulsion polymer. Unlike ordinary exterior paints, it provides dual benefit of aesthetics with waterproofing property to cement sheets.
    Applications
    All types of exterior masonry surfaces, concrete, cement sand renderings

    Asbestos sheets

    Cement Sheets

    Flashings and Covings

    Sealing joints, laps and roofing screw on corrugated roofs

    Benefits
    Ready to use -no dilution is required hence ensures desired film thickness built-up without affecting the performance
    Ease of application ? User friendly, easily applicable by brush, roller or spray
    Microbial resistance ? Resistance to fungus and algae hence maintains the aesthetic value. UV resistant
    Dirt pick up ? Very low dirt pick up & can be cleaned easily hence maintains the aesthetics
    Toxicity ? it is non-toxic
    Abrasion resistant?No additional protective coating is required for roof subjected to foot traffic
    Light weight ? does not add extra weight over the roof

    15,799.0017,855.00
    ex. GST
    Sold By: Karvi E&C

    MRO 4045 CEMENT SHEET KOTE- 1 Case (20 kg)

    15,799.0017,855.00
    ex. GST
  • -12%

    MRO 4025 HEATSHIELD- 1 Case (20 kg)

    Sold By: Karvi E&C

    Coating
    ?MRO 4025 ? HEATSHIELD? is a water-based, high solids, acrylic latex elastomeric coating reducing the heat loading into a buildings up to 35 %. This highly effective radiant barrier, heat reflecting roof coating paint is designed for maximum thermal efficiency, high reflectivity, ultra violet resistance and years of trouble free service with energu savings.
    Applications
    Recommended for:

    Commercial buildings

    Warehouses

    Factories

    Metal tanks

    Water tanks

    Industrial & godown shades with GI

    Cold storages

    Computer server rooms

    Electrical control panel rooms

    Walking decks & balconies

    Stair ways & pool area

    Green buildings

    Benefits
    Typical Reduction in Roof Temperatures
    RCC terraces: 10?C to 15?C
    Asbestos cement sheets: 15?C to 20?C
    GI or powder coated sheets: Up to 25?C

    19,186.0021,685.00
    ex. GST
    Sold By: Karvi E&C

    MRO 4025 HEATSHIELD- 1 Case (20 kg)

    19,186.0021,685.00
    ex. GST
  • -12%
    15,799.0017,860.00
    ex. GST
    Sold By: Karvi E&C

    MRO 4021 RAINSHADE- 1 Case (20 kg)

    15,799.0017,860.00
    ex. GST
  • -12%

    MRO 4020 ROADMARC – 1 Case (4 Units – 5 kg each)

    Sold By: Karvi E&C

    Coating
    ?MRO 4020 ? ROADMARC? is a pure acrylic resin based roadmarking paint that is specially formulated with high quality weather durable pigments.
    Applications
    As a road marking paint to draw parking bay lines, arrows, numbers, lines etc.

    Curbstone

    Traffic Crossings

    Service Stations

    Warehouses

    Floor Coatings

    Garages

    Benefits
    Very tough and abrasion resistant.
    Excellent weather durability.
    Lead & Chrome free, low VOC(<100g/l) and environment friendly. Fast drying. Easier, safer cleanup using water and mild solvents or Suitable for use on bituminous and concrete surfaces.

    25,796.0029,160.00
    ex. GST
    Sold By: Karvi E&C

    MRO 4020 ROADMARC – 1 Case (4 Units – 5 kg each)

    25,796.0029,160.00
    ex. GST
  • -12%

    MRO 4019 KONKRETE PUTTY – 1 Case (20 kg)

    Sold By: Karvi E&C

    PU modified cementitious floor screed for repair
    ?MRO 4019 ? KONKRETE PUTTY? is a four -component urethane modified cementitious flooring repair system formulated to withstand harsh and demanding environments. It combines the most demanding performance characteristics resistance to impact, abrasion, chemicals and thermal attack. A PU binder is combined with Portland cement and graded aggregates to deliver superior performance characteristics. It can be installed with integral cove base for areas requiring sanitary seamless wall to floor transition also.
    Applications
    Ideal for patching concrete, brick, masonry & floors.

    Benefits
    Can be used for versatile applications as it has an excellent adhesion to various substrates ? concrete, quarry tiles, brick pavers and plywood.
    Easy and quick to install.
    Can be used in occupied areas due to very low odour & Zero VOC.
    Long lasting repair due to excellent impact and abrasion resistance.

    14,672.0016,585.00
    ex. GST
    Sold By: Karvi E&C

    MRO 4019 KONKRETE PUTTY – 1 Case (20 kg)

    14,672.0016,585.00
    ex. GST

Shop By Category